The third episode of #AskGlaston Flat Tempering Series covers the challenges with the mixed production.
The common issue of mixed production is decreased loading table utilization and, therefore, reduced process efficiency. This is because combining different glass sizes in the same load requires accurate heating control and profound operator process knowledge. Lack of either of these usually results in underheating larger-size glasses or overheating the smaller ones. In turn, this leads to end product quality issues and unnecessary breakages.
Unlike any other convection technology in the market, Vortex Pro addresses the issue effectively. Without any operator input, Vortex Pro automatically creates individual convection profiles for each glass. Its convection uninterruptedly follows the glass movement in the heating section, allowing heat to be focused precisely to the specific point on each glass.
As a result, Vortex Pro has three major benefits:
Accurate and individual heat focusing for each glass
Decreased operator input to maintain constant high output quality
Reduced compressed air consumption, as the convection only targets the glass sheets
05.10.2022, Glaston
此网站新闻材料的版权属于公司或第三方的新闻提供者，其所有权利保留。所有新闻材料对其访问者只能限于其本人使用，并且使用此材料的风险由其使用者独自自行承担。严禁对新闻材料进行再次发布和其它商业利用. 作为商业贸易的用途。如果新闻材料由第三方提供，当应用此新闻材料时，每个使用者都同意遵守，并且受此特定的项目的约束。Glass Global并不代表及认可新闻材料中所包含的内容及新闻中的外部网站的内容的准确性及可靠性。
Should the content or the design of these sites violate third parties rights or legal prescriptions, we kindly ask you to send us a respective message without invoice or cost. We guarantee that passages where the claim is considered as justified will be removed immediately, without any necessity to involve any lawyer into this issue. We will reject any claim caused by submission of a honorary note in this regard without any prior contact and confirmation of the issueby us and we reserve the right ssue counter claim ourselves because of violation of aforesaid conditions.