DELO Presents Functional High-Performance Materials for Liquid Additive Manufacturing

Having further developed its liquid materials, DELO creates new possibilities for liquid additive manufacturing. The high-performance materials providing different functionalities, such as transparency or flexibility can be combined in one printing process, adhere reliably, and have isotropic strength in all printing directions. They are particularly well suited for automotive and microelectronic applications.

The liquid materials that have been optimized specifically for industrial 3D printing applications are light-curing epoxy resins. Depending on the desired properties such as flexibility, transparency, or conductivity, tailor-made materials based on a broad product portfolio can be made available.

Having a similar chemical basis, the functional high-performance materials are perfectly combinable and exhibit good adhesion to each other, which makes them ideal for material mixes. Hard and flexible materials, for example, can be used in one printing process. For this purpose, several dispensing heads are installed in the printer, applying the respective liquid materials according to defined parameters. Depending on the dispensing equipment, structures with wall thicknesses of less than 500 µm are possible. For complex structures with overhangs or undercuts, users can rely on a water-soluble support material.

Since the functional materials are dispensed at room temperature, no heating of the material or installation space is required. Curing until final strength takes place within a few seconds using UV light. This simplifies the process and helps save energy.

Both the different dispensing heads and the curing lamps can be integrated into existing production lines. As a result, the printing process can also be combined with other manufacturing processes.

The properties of the cured DELO materials are comparable to those of high-performance plastics such as polyamide or PEEK. This is reflected, among other things, by the materials' high temperature and media resistances. In addition, the materials show isotropic strengths in all printing directions.

More information can be found at www.DELO.show/3d-printing. 

 

  About DELO Industrial Adhesives

DELO is a leading manufacturer of industrial adhesives with its headquarters in Windach near Munich, Germany, and subsidiaries in the USA, China, Singapore and Japan. In the fiscal year 2019, 780 employees generated sales revenues of EUR 156 million. The company's special adhesives are now found in almost every car and mobile phone as well as in aircraft. DELO’s customers include Bosch, Daimler, Huawei, Osram, Siemens and Sony.

 

05.03.2020, DELO

此网站新闻材料的版权属于公司或第三方的新闻提供者,其所有权利保留。所有新闻材料对其访问者只能限于其本人使用,并且使用此材料的风险由其使用者独自自行承担。严禁对新闻材料进行再次发布和其它商业利用. 作为商业贸易的用途。如果新闻材料由第三方提供,当应用此新闻材料时,每个使用者都同意遵守,并且受此特定的项目的约束。Glass Global并不代表及认可新闻材料中所包含的内容及新闻中的外部网站的内容的准确性及可靠性。

Should the content or the design of these sites violate third parties rights or legal prescriptions, we kindly ask you to send us a respective message without invoice or cost. We guarantee that passages where the claim is considered as justified will be removed immediately, without any necessity to involve any lawyer into this issue. We will reject any claim caused by submission of a honorary note in this regard without any prior contact and confirmation of the issueby us and we reserve the right ssue counter claim ourselves because of violation of aforesaid conditions.