New innovation: Automatic tempering furnace bed unloading and loading system

New innovation: Automatic tempering furnace bed loading and unloading system

We, the Haselsteiner GmbH, have developed an automatic tempering furnace bed loading and unloading system. Since, in most cases a glass tempering plant has a very high-power consumption and therefore causes high operating costs, an optimal use of the tempering furnace is of utmost importance. Well, in many cases a higher utilization is not easy to realize for organizational reasons. However, a higher furnace bed loading (use of furnace bed area) and a higher number of oven loadings per hour are the basic requirements to reduce the tempering costs per m² of glass.
Again and again, attempts are made to reduce power consumption. The currently available technical possibilities for better energy efficiency have largely been implemented in new tempering plants anyhow.

The best way to reduce the tempering costs per m² is to increase:

  1. glass density of the bed loading
  2. number of oven loads per hour

We have now developed an automatic tempering furnace bed loading and unloading system with automatic glass lite nesting. With our system, a tempering furnace bed can not only be loaded quicker and more continuous but also automatically unloaded again with the glass lites separated for further processing. A decisive factor of our system is that we do not touch the coated glass surface on any glass lite during the loading, nesting, unloading or separation of each glass lite.

Main features of our system:

  1. No manual glass handling - neither at the inlet side nor at the outlet side of the furnace
  2. No limitation of glass size except nothing smaller than 400 x 400 mm
  3. For rectangular and square glass sheets (straight line shapes on request)
  4. No limitation in relation to the weight of the glass
  5. No limitation for soft coatings or low-e glass
  6. We never touch the coated glass surface
  7. Glass panes can be rotated by +/- 90 degrees
  8. Highly efficient mechanical nesting on the tempering bed
  9. Individual glass sheet loading adjusted for best tempering quality
  10. Faster and continuous bed loading
  11. Higher furnace loading per hour, more cycles
  12. Our loading side and unloading side communicate with each other = "continuity"
  13. Better tempered glass quality through continuous loading
  14. Reduction of costs per m² of tempered glass due to higher plant utilization
  15. Potential savings in personnel
  16. No risk of injury to personnel
  17. No loading errors
  18. Reduced CO2 costs per m² of tempered glass
automatic tempering furnace bed loading and unloading system
Sample picture:automatic tempering furnace bed loading and unloading system (The installation of the system may vary)
 

Automatic loading side: No operator is required for loading:
automatic loading side no operator needed

Automatic unloading side: No operator is required for unloading:
automatic unloading side no operator needed

Sample of the “mechanical” possibilities for automatic glass sheet nesting:
sample of automatic glass sheet nesting

What advantage comes with the fully automatic furnace bed loading and unloading:
➢ better furnace bed utilization
➢ more oven loads per hour
➢ higher margin per tempering furnace
The increase number of glass lites tempered per furnace and hour can significantly reduce the tempering costs per m² glass.

18.06.2020, Haselsteiner GmbH

此网站新闻材料的版权属于公司或第三方的新闻提供者,其所有权利保留。所有新闻材料对其访问者只能限于其本人使用,并且使用此材料的风险由其使用者独自自行承担。严禁对新闻材料进行再次发布和其它商业利用. 作为商业贸易的用途。如果新闻材料由第三方提供,当应用此新闻材料时,每个使用者都同意遵守,并且受此特定的项目的约束。Glass Global并不代表及认可新闻材料中所包含的内容及新闻中的外部网站的内容的准确性及可靠性。

Should the content or the design of these sites violate third parties rights or legal prescriptions, we kindly ask you to send us a respective message without invoice or cost. We guarantee that passages where the claim is considered as justified will be removed immediately, without any necessity to involve any lawyer into this issue. We will reject any claim caused by submission of a honorary note in this regard without any prior contact and confirmation of the issueby us and we reserve the right ssue counter claim ourselves because of violation of aforesaid conditions.