SWISSSPACER, the Swiss specialist for “Warm Edge” spacer bars, is expanding the scope of service of CALUWIN.
Using the tried-and-tested online tool, manufacturers of insulated glass units and window makers now have a very easy way to check whether the use of SWISSPACER Air is able to achieve the pressure equalisation required to avoid the damage caused by climatic loads – fully tailored to specific insulated glass units and for underlying conditions such as climatic zones and height differences during transport.
The digital solution also makes it possible to determine whether the planned insulated glass units will achieve a service life of more than fifteen years as required by DIN EN 1279-2 (“Glass in building”). “Manufacturers of insulated glass units and window makers can perform their own feasibility analysis with the new tool,” Rutger van Eijk, Sales Director Europe at SWISSPACER, explains the advantages, and continues, “Should it not be possible to use SWISSPACER Air to equalise the pressure, then alternatives can be simulated. So in this case, too, we can find a solution together with the customer.”
The online tool is very easy to use. Processors enter the required parameters into a selection screen. These include the type and coating of the glass, double or triple glazing, the size of the cavity and the dimensions of the unit. While performing the calculation, the application takes into consideration both the maximum height difference between production and installation location and the respective climatic zone.
“Thanks to the new tool, manufacturers of insulated glass units and window makers no longer have to rely on the ‘trial and error’ approach. They now have a safe calculation basis available to them for the planning process,” Eijk summarises the main advantage of the CALUWIN extension.
The calculation is based on current regulations such as TRLV (Technical Rules for the Use of Glazing on Linear Supports), prEN 16612:2017 (basis of assessment for the mechanical and thermal properties of triple glazing units), DIN EN 673 for determining the temperature in the cavity between the panes and DIN EN 1279-2 for calculating the expected service life.
15.04.2021, SWISSPACER
此网站新闻材料的版权属于公司或第三方的新闻提供者，其所有权利保留。所有新闻材料对其访问者只能限于其本人使用，并且使用此材料的风险由其使用者独自自行承担。严禁对新闻材料进行再次发布和其它商业利用. 作为商业贸易的用途。如果新闻材料由第三方提供，当应用此新闻材料时，每个使用者都同意遵守，并且受此特定的项目的约束。Glass Global并不代表及认可新闻材料中所包含的内容及新闻中的外部网站的内容的准确性及可靠性。
Should the content or the design of these sites violate third parties rights or legal prescriptions, we kindly ask you to send us a respective message without invoice or cost. We guarantee that passages where the claim is considered as justified will be removed immediately, without any necessity to involve any lawyer into this issue. We will reject any claim caused by submission of a honorary note in this regard without any prior contact and confirmation of the issueby us and we reserve the right ssue counter claim ourselves because of violation of aforesaid conditions.