HORN® DEVELOPS NEW BURNER BRACKET H-RAB
The burner angle is a very important parameter, as it can have a strong influence on the melting process, furnace life and emission values.
He further facilitates lower energy consumption. Therefore an accurate and rapid adjustment of the burner angle after burner replacement or cleaning is of utmost importance.
The HORN® Rapid Adjust Bracket H-RAB offers a simplified adjustment of the correct burner angle to get replicable values. With two adjusting wheels the operator can easily adjust both the horizontal and vertical angle. The centre point of rotation is the nozzle tip itself. Thanks to an integrated scale, the angle can be read off easily.
With regard to Industry 4.0 the holder is prepared for later installation of servo drives. With the input of additional information coming from NIR camera systems or other sensors the HORN® Rapid Adjust Bracket H-RAB bears the possibility of remote control.
09.06.2021, Horn Glass Industries
print此网站新闻材料的版权属于公司或第三方的新闻提供者，其所有权利保留。所有新闻材料对其访问者只能限于其本人使用，并且使用此材料的风险由其使用者独自自行承担。严禁对新闻材料进行再次发布和其它商业利用. 作为商业贸易的用途。如果新闻材料由第三方提供，当应用此新闻材料时，每个使用者都同意遵守，并且受此特定的项目的约束。Glass Global并不代表及认可新闻材料中所包含的内容及新闻中的外部网站的内容的准确性及可靠性。
Should the content or the design of these sites violate third parties rights or legal prescriptions, we kindly ask you to send us a respective message without invoice or cost. We guarantee that passages where the claim is considered as justified will be removed immediately, without any necessity to involve any lawyer into this issue. We will reject any claim caused by submission of a honorary note in this regard without any prior contact and confirmation of the issueby us and we reserve the right ssue counter claim ourselves because of violation of aforesaid conditions.
