Glass Industry News

Pressure-equalised and mobile at great heights

, SWISSPACER

Motorhomes, camper vans and expedition vehicles are sometimes exposed to extreme weather as well as altitude and temperature differences while touring around the world. Therefore, the windows they are fitted with must also meet particularly high requirements. This is precisely where the start-up extremfenster steps in with its specially developed SKI aluminium windows. Thanks to the SWISSPACER Air integrated into the cavity between the panes, these windows can withstand enormous differences in height and climate loads.

From idea to realisation

The idea to develop a special window for motorhomes came to managing director Constantin Hanov-Blum while he was planning a trip around the world in 2019. For this purpose, the enthusiastic globetrotter from Mittenwalde converted a decommissioned fire engine into a touring vehicle. The conversion also included plans for the windows and doors. Constantin Hanov-Blum recalls, “I couldn’t find a suitable solution on the market, so I ended up constructing a narrow, lightweight window from aluminium myself, precisely tailored to the requirements of the motorhome.” The feedback he received on the initially developed prototypes was extremely positive at the time – and so the company extrem was born a short while later.   

Specially constructed window system

The SKI aluminium window developed by extremfenster has a stable sash as well as a flush frame made from insulated, thermally broken aluminium profiles. Thanks to the three sealing layers all round, the construction is totally dust- and watertight. High-quality, stainless steel scissor hinges guarantee easy and infinitely variable opening. Regarding the glazing used, Constantin Hanov-Blum explains, “Initially, we wanted to install double glazing in the form of toughened safety glass, but above all we also had to factor in suitability for high altitudes, due to the extreme loads that occur on tours in a wide range of climate zones. Precisely because of the small pane sizes used in touring vehicles, the climate-related loads are very high.” While searching for possible solutions, the experienced inventor came across SWISSPACER Air.

SWISSPACER Air – pressure-equalised insulating glass units at every height

The SWISSPACER Air is installed in the glazing edge of the air-filled insulating glass unit. It minimises the overpressure or underpressure caused by height differences and climate loads, since the metal sleeve with integrated special membrane ensures the equalisation of pressure between the surrounding air and the cavity between the panes. Its special structure prevents vapour from being able to accumulate in the cavity between the panes, which would otherwise cause the formation of condensation or damage the metallic low-e coatings. The insulated glass unit retains its function and quality over the long term through permanent pressure equalisation. A usual service life can thus be achieved – even in the presence of climatic loads.

The danger of bulging panes, glass breakage and premature ageing due to excessive stress on the glazing edge is significantly reduced. Constantin Hanov-Blum points out, “The insulating glass has road approval and can be used in practically every climate condition. The vehicles can travel around the world and at any height.”

Depending on project requirements, SWISSPACER Air has been used at extremfenster in the SKI aluminium windows and other constructions for more than three years. The specially developed glazing units have already successfully survived an expedition to the volcanoes of Mexico at a height of 4,400 metres and the Andes at a height of 3,500 metres. And a touring vehicle converted for a customer will shortly set off for Elbrus – the highest peak in the Caucasus, at 5,642 metres. Here, too, the SWISSPACER Air ensures the required pressure equalisation in the cavity between the panes.

Further developments planned for extreme climate conditions

However, the development of glazing units that are suitable for use at high altitudes is far from over. Every day, the extremfenster team works on new solutions that promise even better performance. Constantin Hanov-Blum says, “We are currently building a Saint-Gobain glazing unit with a special coating to create an insulating glass unit with vehicle approval. These panes would block almost the entire infrared warmth and ensure that the interior does not heat up.” Last but not least, the specialists are working on glazing units that are even more resistant to vibrations and driving rain. Real extreme windows, in fact.

, © SWISSPACER

此网站新闻材料的版权属于公司或第三方的新闻提供者,其所有权利保留。所有新闻材料对其访问者只能限于其本人使用,并且使用此材料的风险由其使用者独自自行承担。严禁对新闻材料进行再次发布和其它商业利用. 作为商业贸易的用途。如果新闻材料由第三方提供,当应用此新闻材料时,每个使用者都同意遵守,并且受此特定的项目的约束。Glass Global并不代表及认可新闻材料中所包含的内容及新闻中的外部网站的内容的准确性及可靠性。

Should the content or the design of these sites violate third parties rights or legal prescriptions, we kindly ask you to send us a respective message without invoice or cost. We guarantee that passages where the claim is considered as justified will be removed immediately, without any necessity to involve any lawyer into this issue. We will reject any claim caused by submission of a honorary note in this regard without any prior contact and confirmation of the issueby us and we reserve the right ssue counter claim ourselves because of violation of aforesaid conditions.



Info Grid

Glass studies

Updated worldwide glass study 2024

plants.glassglobal.com

Updated hollow glass study 2024

Request more information

Updated float glass study 2024

Request more information

Further glass market studies

Request more information

公司简介



Updated worldwide glass market study 2024 available now for flat, container glass and tableware

We have updated our international studies on flat glass, container glass and tableware for 2024.

This unique software provides a global overview about glass producers and technical details. Easy to use and clear tables summarize information and data about glass makers such as: Glass types: flat glass, container glass, tableware, production capacities in regions and countries, number of furnaces, furnace types, year of construction, glass types and sub-types, products, project information, special news and downloads.

Further databases supplying demoscopic data and import and export data complete the market survey. Based on these data, prepare individual country profiles with information about local production capacities, local market sizes and expected demand in the future.

Request your offer via plants.glassglobal.com.

Updated container glass study 2024

X

Updated float glass study 2024

X

Further glass studies and reports 2024

X