Pumping Non-Stop 20 Years Long
Part of a UV30 vacuum pump from 2002 has returned to Pneumofore for its first overhauling after 20 years of continuous operation. Only the air-end was sent for revision. The machine has been running at Glassforce in Nigeria to support the moulding process of container glass. The vacuum cools the mould and reduces defects, as it evacuates all the air to enable fast and complete loading of the mould with hot, liquid glass.
The overhauling in this case was limited to only the replacement of the bearings as the vanes are still in great condition. A second UV30 vacuum pump continues to run at Glassforce without ever having required overhauling, notwithstanding its 160,000 hours of operation thus far.
15.06.2022, Pneumofore
print此网站新闻材料的版权属于公司或第三方的新闻提供者，其所有权利保留。所有新闻材料对其访问者只能限于其本人使用，并且使用此材料的风险由其使用者独自自行承担。严禁对新闻材料进行再次发布和其它商业利用. 作为商业贸易的用途。如果新闻材料由第三方提供，当应用此新闻材料时，每个使用者都同意遵守，并且受此特定的项目的约束。Glass Global并不代表及认可新闻材料中所包含的内容及新闻中的外部网站的内容的准确性及可靠性。
Should the content or the design of these sites violate third parties rights or legal prescriptions, we kindly ask you to send us a respective message without invoice or cost. We guarantee that passages where the claim is considered as justified will be removed immediately, without any necessity to involve any lawyer into this issue. We will reject any claim caused by submission of a honorary note in this regard without any prior contact and confirmation of the issueby us and we reserve the right ssue counter claim ourselves because of violation of aforesaid conditions.
