ANHUA GLASS TOOLS LIMITED
| 描叙 | Type | Size | |
|---|---|---|---|
| BD Polishing Wheel Series Fine, reflective and clear performance. Good for using on Shape Machine or single/double round edging machine. |
JPG | 59,539 byte | show |
| BK Polishing Wheels Series Good partner to remove lines/marks left by previous diamond wheel processing and get a certain polishing effect. Black, clear and reflective performance. |
JPG | 56,525 byte | show |
| Diamond Cutting Disc Series Diamond cutting disc election according to cutting purpose: 1). For quick cutting purpose 2). For fine cutting purpose 3). For gem cutting purpose |
JPG | 61,450 byte | show |
| Diamond Drill Series 1/2" GAS BELGIUM screwed sintered diamond glass drill bits 1). Length: 75mm, 95mm, 2). Hole Size: 4 - 75 mm, 3). Sand height: 10 mm, 4). Sand thickness: 0.85 mm, 5). Fixing method: Thread, Cone Shank, Straight Shank, 6). Thread size: 1/2" GAS BELGIUM, 7). Lifespan: It is around 4000pcs 8mm holes that drills 5mm glass on Bevelloin semi-automatic table double drilling machine, for example. 8). Performance: few tiny chips about the rim of hole, even and smooth hole wall, 9). Video: https://www.youtube.com/watch?v=jR6Zv5xwUlA |
JPG | 67,224 byte | show |
| Glass profile diamond grinding wheel Shape of trapezoidal edge, pencil edge, OG/2OG/3OG, bull Nose, half bull nose, miter and so on. Machine of CNC working center (INTERMAC MASTER), shape edge machine (liked SB - 10 Bavelloni), pencil or OG edging machine, or, customized machine. |
JPG | 175,073 byte | show |
| Diamond cup grinding wheel Types: Full segments, half segments, inner segments, outer segment, and CC. Application: Vertical edging machine, double edging machine, vertical bevelling machine, shape bevelling machine, Levels: Q5 and Q6 Performance: Even and average edge surface, small chips required following arris in size of 0.8 mm only. |
JPG | 167,057 byte | show |
| Felt Wheel (Spiral or Pure Wool) 1. Spiral felt polishing wheel commonly uses for fine polishing on the last two or three positions of straight line bevelling machine, some on straight line edging machine. It works with cerium oxide water mixture to have a shining, fleek, refletive surface of bevel (bevel width from 5 mm to 60 mm). 2. Pure wool polishing wheel applies to have glass surface clear or have tiny scratch removed. It works with cerium oxide water mixture as well. The wheel density is 0.5 g/cm3. 3. Video: https://www.youtube.com/watch?v=o0djBsttFBs |
JPG | 152,156 byte | show |
| Polishing Wheel (1). On a edging machine, there are two functional polishing wheels, one is rough polishing, another is fine polishing. (2). Rough polishing is responsible for turning the matt with lines/marks edge to be of misty one. It has some capabilities of lines/marks removal that cuts off 0.2mm edge thickness. (3). Fine polishing is to turn misty edge to be of clear and transparent one. |
JPG | 59,088 byte | show |
| Resin Wheel | JPG | 182,090 byte | show |
| flat wheel | JPG | 38,455 byte | show |
| Company Location | JPG | 80,948 byte | show |
| Diamond grinding wheel series | 619,746 byte | show | |
| Polishing wheel series | 515,837 byte | show | |
| Glass tools series | 432,175 byte | show | |
| Polishing material series | 273,499 byte | show | |
| Machine fitting | 234,528 byte | show |
