|地址||Grafotec Spray Systems GmbH
|电子邮箱||Get in contact with Grafotec Spray Systems GmbH|
AGA1000 Auto Glass Applicator
The Grafotec AGA - System is an unique, contact-free, mechanical working roller application system, which impresses through its simple technology. Due to its nearly maintenance free and extremely service-friendly design, it is particularly well suited for a continuous operation such as for the production of wind-shields.
- The system especially distinguishes through its even and homogeneous application. The liquid amount could be easy controlled by the mechanically operated adjustment post.
- The highspeed application roller (up to 6000 rpm) produces a very fine mist directed towards the front. The amount of mist leaving the housing is controlled by the mechanically adjustable shutter gap.
- The pneumatic driven shutter (opening and closing) allows to apply the liquid on individual sheets, without losing much of the liquid.
- The PLC controller is well proven and allows quick adaptation to various production needs.
LA 1000 Liquid Applicator
The Grafotec LA - System is an unique mechanical Liquid Applicator system using a basically simple technology. Due to its nearly maintenance free and extremely service-friendly design, it is particularly well suited for a continuous operation such as for the production of flat glass in a floatline. By using a DraftControl cabinet and an ReverseOsmosis system you have a totally complete and clean operation. This at the same time solves all possible environmental control questions, a subject of greatly increasing importance. The high speed application roller (up to 6000 rpm) produces a very fine mist directed towards the front. The amount of mist leaving the housing is controlled by the electronically adjustable shutter gap.
By using an automatic curtain width control and by the possibility of varying the saturation level of the liquid sprayed, you have the choice of applying an extremely wide range of liquids with excellent results.
The PLC controller is well proven and allows quick adaptation to various production needs.
By staggering the individual applicator bars, the unit can cover spray widths of up to 5700mm. The two outer bars each are equipped with a motorized baffle which automatically adjust the spray curtain to the exact width of the ribbon. Strategically located sensors lets the spray curtain follow the ribbon drift and watch over the beginning / end of a ribbon as well as over broken ribbons.
Whenever the available city water may not have the required consistency, we recommend the use of our ReverseOsmosis system. This system can be expanded with a MixingStation, which then runs nearly fully automatically.